| Item | Specification |
|---|---|
| * Recommended lubricant | Shell M1375.4 |
| + Torque converter nose | Molybdenum disulphide grease to specification FB180 |
* Do not use any lubricant other than that specified.
+ Do not over lubricate.
Capacity
| Item | Capacity |
|---|---|
| + Initial dry fill | 9.5 liters (16.7 pints) (10.0 US qts) |
+ A final oil level check/drain down/top-up must be carried out when the unit has been installed.
General Specification
| Item | Specification |
|---|---|
| Automatic transmission | ZF 6HP26 |
| Speeds | 6 Forward, 1 Reverse |
| Gear ratios: | |
| First | 4.17:1 |
| Second | 2.340:1 |
| Third | 1.521:1 |
| Fourth | 1.143:1 |
| Fifth | 0.867:1 |
| Sixth | 0.691:1 |
| Reverse | 3.403:1 |
| Torque converter | Sachs W270 4GWK with turbine torsional damper and slip controlled, dual friction faced lock-up clutch |
| Transmission control module: | |
| Location | Located in gearbox casing |
| Type | 19.04 |
Torque Specifications
| Description | Nm | lb-ft |
|---|---|---|
| Main control valve body Torx screws | 8 | 6 |
| Transmission heat shield bolts | 9 | 7 |
| Transmission heat shield bracket bolts | 9 | 7 |
| Selector cable bracket bolts | 9 | 7 |
| Wiring harness bracket bolts | 10 | 7 |
| Fluid pan Torx screws | 8 | 6 |
| Transmission support insulator bolts | 60 | 44 |
| Selector shaft nut | 12 | 9 |
| Flexplate to torque converter bolts | 55 | 41 |
| Transmission bolts | 45 | 33 |
| Transmission breather pipe clip bolt | 25 | 18 |
| Transmission fluid lines clip bolt | 10 | 7 |
| Radiator access panel bolts | 10 | 7 |
| Transmission fluid drain plug | 8 | 6 |
| Transmission fluid filler/level plug | 35 | 26 |
| Transmission under shield bolts | 10 | 7 |
| Transfer case bolts | 45 | 33 |
| Selector cable to selector lever nut | 10 | 7 |