General Specifications
| Item | Specification |
|---|---|
| Gap between underside of the toe link rubber boot and the integrated body frame bracket | 15.0 mm (0.591 in) |
| Height between the center of the halfshaft end and the edge of the fender trim | 463 mm (18.19 in) |
Torque Specifications
| Description | Nm | lb-ft |
|---|---|---|
| ** Toe link bolt | 175 | 129 |
| * Toe link inner ball joint retaining nut | 133 | 98 |
| * Stabilizer bar link nuts | 115 | 85 |
| Stabilizer bar clamp bolts | 62 | 46 |
| Body mount retaining bolts | 133 | 83 |
| Shock absorber to the lower suspension arm nut and bolt | 300 | 221 |
| Shock absorber to suspension turret nuts | 70 | 52 |
| Lower arm to wheel knuckle bolt | 175 | 129 |
| Lower arm bolts | 275 | 203 |
| *+ Halfshaft retaining nut | 350 | 258 |
| Upper arm to wheel knuckle nut | 133 | 98 |
| Upper arm front bolt | 175 | 129 |
| Upper arm rear bolt | 275 | 203 |
| Brake tube unions | 18 | 13 |
| Rear camber adjusting bolts | 133 | 98 |
| Wheel speed sensor | 9 | 7 |
| Brake disc dust shield bolts | 9 | 7 |
| Parking brake cable coupling | 8 | 6 |
| Road wheel nuts | 140 | 103 |
* New nut must be installed
+ Nut must be staked after tightening
** Bolts may be reinstalled a maximum of 4 times, the bolt head must be marked using a centre punch each time the bolt is refitted. When 4 centre punch marks are visible, a new, 'Patched' bolt must be installed.