- 76.37.28
- Striker - liftgate - adjust
- All Derivatives
- 0.10
Loading...
-
Check for an equal gap and alignment to the adjacent panels. If incorrect, follow the adjust procedure below.
-
Remove the liftgate striker cover.
-
Loosen the 2 liftgate striker bolts.
- Close the liftgate and check for an equal gap and alignment to the adjacent panels.
-
Adjust the bump stops if required.
- Open the liftgate and tighten the liftgate striker bolts to 25 Nm (18 lb.ft).
- Install the liftgate striker cover.
cGtpZWxicmF0OzIwMjQtMDYtMTFUMDc6NDM6MzEuNzU1Wjs4OS42OC44LjkyO1NBTExTQUEyNDhBMTY2MTc0