Published: 19-Jul-2018

2007.0 Range Rover Sport (LS), 303-00

Engine System - General Information

Cylinder Head Distortion (G1676086)

GENERAL PROCEDURES
  • 01.01.34
  • Cylinder head - distortion measurement
  • All Derivatives
  • 0.00
  • USED WITHINS
Check
  1. E160359
    Using a suitable metallic straight edge and feeler gauge, measure the cylinder head face in the areas illustrated. Note the maximum value.
  2. CAUTION:

    Machine the minimum thickness of material from the cylinder head to meet specification. If a selection of cylinder head gaskets are available, increase the thickness of the cylinder head gasket by one size.

    NOTES:

    • Prior to having the cylinder head machined, prior approval is required by Jaguar or Land Rover engineering.

    • If the cylinder head requires machining, this must be carried out by a local engineering company.

    If the cylinder head exceeds the maximum value, the cylinder head must be machined.
    Refer to: Specifications (303-01A, Specifications).
    Refer to: Specifications (303-01B, Specifications).
    Refer to: Specifications (303-01C, Specifications).
    Refer to: Specifications (303-01D, Specifications).